TKK primers improve the adhesive qualities of TKK sealants on various surfaces. TKK primers should be used where bigger pressure, tensile forces are expected and for damper places. They are recomended for porous and synthetic materials.
Primer KVZ 12 Two component waterproof primer on the basis of epoksi resin
Primer KVZ 16 One component polyurethane primer
Primer PU 10 One component polyurethane primer
Primer PL One component primer on the basis of syloksanes in organic solvents
Technical data
Specific gravity (kg/m3)
Drying time (min)
Consumption for 10 mm deep joints (g/m)
Primer KVZ 12
980 (A+B components)
approx. 120
3 - 4
Primer KVZ 16
1100
approx. 20
5 - 7
Primer PU 10
970
approx. 30
5 - 7
Primer PL
950
approx.15
1 - 2
Application
Primer KVZ 16, PU 10, PL
Apply the primer to a clean, dry and fat-free surface. Wait for it to dry (regard the drying time in the chart) and begin sealing with the appropriate sealant.
Primer KVZ 12
First mix both components separately and then together in a ratio of 7:2 (A:B). Apply the primer to a clean, dry and fat-free surface. After drying (2 hours), begin sealing.
Primers should be used with prescribed sealants and surfaces, because they can otherwise act as separating fators. In the chart 'The use of primers' it is shown which primer and sealant are to be used for a specific surface. For each case of usage we recomend prior testing.
Packing
Primer KVZ 12
Component A: 630g, 140g
Component B: 180g, 40g
Primer KVZ 16
0,2 kg; 1kg; 5kg
Primer PU 10
0,2 kg; 1kg
Primer PL
0,2 kg
Storage
24 months, 12 months - primer PU 10 in the originally sealed package at room temperature. Keep away from sources of fire.
Safety precautions
Keep out of the reach of children. Use only in well-ventilated areas. Wear suitable gloves. After contact with skin, wash immediately with plenty of water. In case of contact with eyes, rinse immediately with olenty of water and seek medical advice. Keep in a cool place and in a well-ventilated place.
Attention
The information supplied is accurate to the best of our knowledge and is based on reliable tests and practical experiences. Properties quoted are intended, as a guide and do not therefore constitutes a specification. You should thoroughly test any application to be sure that product corresponds to the required performances.
The use of primers
KVZ-12 = use Primer KVZ 12 - = usage not recomended KVZ-16 = use Primer KVZ 16 PU-10 = use Primer PU - 10 * = Regard the technical data for Tekadom Acrylic sealant PL = use Primer PL + = Good adhesive qualities without primer
Products by properties